--- dao/DaoAdresseService/WebContent/WEB-INF/web.xml	2015/02/22 20:17:55	2336
+++ dao/DaoAdresseService/WebContent/WEB-INF/web.xml	2015/02/23 12:30:41	2337
@@ -1,800 +1,800 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
-
-Copyright 2000-2007 Sun Microsystems, Inc. All rights reserved.
-
-The contents of this file are subject to the terms of either the GNU
-General Public License Version 2 only ("GPL") or the Common Development
-and Distribution License("CDDL") (collectively, the "License").  You
-may not use this file except in compliance with the License. You can obtain
-a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
-or glassfish/bootstrap/legal/LICENSE.txt.  See the License for the specific
-language governing permissions and limitations under the License.
-
-When distributing the software, include this License Header Notice in each
-file and include the License file at glassfish/bootstrap/legal/LICENSE.txt.
-Sun designates this particular file as subject to the "Classpath" exception
-as provided by Sun in the GPL Version 2 section of the License file that
-accompanied this code.  If applicable, add the following below the License
-Header, with the fields enclosed by brackets [] replaced by your own
-identifying information: "Portions Copyrighted [year]
-[name of copyright owner]"
-
-Contributor(s):
-
-If you wish your version of this file to be governed by only the CDDL or
-only the GPL Version 2, indicate your decision by adding "[Contributor]
-elects to include this software in this distribution under the [CDDL or GPL
-Version 2] license."  If you don't indicate a single choice of license, a
-recipient has the option to distribute your version of this file under
-either the CDDL, the GPL Version 2 or to extend the choice of license to
-its licensees as provided above.  However, if you add GPL Version 2 code
-and therefore, elected the GPL Version 2 license, then the option applies
-only if the new code is made subject to such option by the copyright
-holder.
--->
-<!--
-This is the XML DTD for the Servlet 2.3 deployment descriptor.
-All Servlet 2.3 deployment descriptors must include a DOCTYPE
-of the following form:
-
-  <!DOCTYPE web-app PUBLIC
-	"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
-	"http://java.sun.com/dtd/web-app_2_3.dtd">
-
--->
-<!--
-The following conventions apply to all J2EE deployment descriptor
-elements unless indicated otherwise.
-
-- In elements that contain PCDATA, leading and trailing whitespace
-  in the data may be ignored.
-
-- In elements whose value is an "enumerated type", the value is
-  case sensitive.
-
-- In elements that specify a pathname to a file within the same
-  JAR file, relative filenames (i.e., those not starting with "/")
-  are considered relative to the root of the JAR file's namespace.
-  Absolute filenames (i.e., those starting with "/") also specify
-  names in the root of the JAR file's namespace.  In general, relative
-  names are preferred.  The exception is .war files where absolute
-  names are preferred for consistency with the servlet API.
--->
-<!--
-The web-app element is the root of the deployment descriptor for
-a web application.
--->
-<!--
-The auth-constraint element indicates the user roles that should
-be permitted access to this resource collection. The role-name
-used here must either correspond to the role-name of one of the
-security-role elements defined for this web application, or be
-the specially reserved role-name "*" that is a compact syntax for
-indicating all roles in the web application. If both "*" and
-rolenames appear, the container interprets this as all roles.
-If no roles are defined, no user is allowed access to the portion of
-the web application described by the containing security-constraint.
-The container matches role names case sensitively when determining
-access.
-
-
-Used in: security-constraint
--->
-<!--
-The auth-method element is used to configure the authentication
-mechanism for the web application. As a prerequisite to gaining access to any web resources which are protected by an authorization
-constraint, a user must have authenticated using the configured
-mechanism. Legal values for this element are "BASIC", "DIGEST",
-"FORM", or "CLIENT-CERT".
-
-Used in: login-config
--->
-<!--
-The context-param element contains the declaration of a web
-application's servlet context initialization parameters.
-
-Used in: web-app
--->
-<!--
-The description element is used to provide text describing the parent
-element.  The description element should include any information that
-the web application war file producer wants to provide to the consumer of
-the web application war file (i.e., to the Deployer). Typically, the tools
-used by the web application war file consumer will display the description
-when processing the parent element that contains the description.
-
-Used in: auth-constraint, context-param, ejb-local-ref, ejb-ref,
-env-entry, filter, init-param, resource-env-ref, resource-ref, run-as,
-security-role, security-role-ref, servlet, user-data-constraint,
-web-app, web-resource-collection
--->
-<!--
-The display-name element contains a short name that is intended to be
-displayed by tools.  The display name need not be unique.
-
-Used in: filter, security-constraint, servlet, web-app
-
-Example:
-
-<display-name>Employee Self Service</display-name>
--->
-<!--
-The distributable element, by its presence in a web application
-deployment descriptor, indicates that this web application is
-programmed appropriately to be deployed into a distributed servlet
-container
-
-Used in: web-app
--->
-<!--
-The ejb-link element is used in the ejb-ref or ejb-local-ref
-elements to specify that an EJB reference is linked to an
-enterprise bean.
-
-The name in the ejb-link element is composed of a
-path name specifying the ejb-jar containing the referenced enterprise
-bean with the ejb-name of the target bean appended and separated from
-the path name by "#".  The path name is relative to the war file
-containing the web application that is referencing the enterprise bean.
-This allows multiple enterprise beans with the same ejb-name to be
-uniquely identified.
-
-Used in: ejb-local-ref, ejb-ref
-
-Examples:
-
-	<ejb-link>EmployeeRecord</ejb-link>
-
-	<ejb-link>../products/product.jar#ProductEJB</ejb-link>
-
--->
-<!--
-The ejb-local-ref element is used for the declaration of a reference to
-an enterprise bean's local home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of the web application
-	  that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected local home and local interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: web-app
--->
-<!--
-The ejb-ref element is used for the declaration of a reference to
-an enterprise bean's home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of
-	  the web application that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected home and remote interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: web-app
--->
-<!--
-The ejb-ref-name element contains the name of an EJB reference. The
-EJB reference is an entry in the web application's environment and is
-relative to the java:comp/env context.  The name must be unique
-within the web application.
-
-It is recommended that name is prefixed with "ejb/".
-
-Used in: ejb-local-ref, ejb-ref
-
-Example:
-
-<ejb-ref-name>ejb/Payroll</ejb-ref-name>
--->
-<!--
-The ejb-ref-type element contains the expected type of the
-referenced enterprise bean.
-
-The ejb-ref-type element must be one of the following:
-
-	<ejb-ref-type>Entity</ejb-ref-type>
-	<ejb-ref-type>Session</ejb-ref-type>
-
-Used in: ejb-local-ref, ejb-ref
--->
-<!--
-The env-entry element contains the declaration of a web application's
-environment entry. The declaration consists of an optional
-description, the name of the environment entry, and an optional
-value.  If a value is not specified, one must be supplied
-during deployment.
--->
-<!--
-The env-entry-name element contains the name of a web applications's
-environment entry.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within a web application.
-
-Example:
-
-<env-entry-name>minAmount</env-entry-name>
-
-Used in: env-entry
--->
-<!--
-The env-entry-type element contains the fully-qualified Java type of
-the environment entry value that is expected by the web application's
-code.
-
-The following are the legal values of env-entry-type:
-
-	java.lang.Boolean
-	java.lang.Byte
-	java.lang.Character
-	java.lang.String
-	java.lang.Short
-	java.lang.Integer
-	java.lang.Long
-	java.lang.Float
-	java.lang.Double
-
-Used in: env-entry
--->
-<!--
-The env-entry-value element contains the value of a web application's
-environment entry. The value must be a String that is valid for the
-constructor of the specified type that takes a single String
-parameter, or for java.lang.Character, a single character.
-
-Example:
-
-<env-entry-value>100.00</env-entry-value>
-
-Used in: env-entry
--->
-<!--
-The error-code contains an HTTP error code, ex: 404
-
-Used in: error-page
--->
-<!--
-The error-page element contains a mapping between an error code
-or exception type to the path of a resource in the web application
-
-Used in: web-app
--->
-<!--
-The exception type contains a fully qualified class name of a
-Java exception type.
-
-Used in: error-page
--->
-<!--
-The extension element contains a string describing an
-extension. example: "txt"
-
-Used in: mime-mapping
--->
-<!--
-Declares a filter in the web application. The filter is mapped to
-either a servlet or a URL pattern in the filter-mapping element, using
-the filter-name value to reference. Filters can access the
-initialization parameters declared in the deployment descriptor at
-runtime via the FilterConfig interface.
-
-Used in: web-app
--->
-<!--
-The fully qualified classname of the filter.
-
-Used in: filter
--->
-<!--
-Declaration of the filter mappings in this web application. The
-container uses the filter-mapping declarations to decide which filters
-to apply to a request, and in what order. The container matches the
-request URI to a Servlet in the normal way. To determine which filters
-to apply it matches filter-mapping declarations either on servlet-name,
-or on url-pattern for each filter-mapping element, depending on which
-style is used. The order in which filters are invoked is the order in
-which filter-mapping declarations that match a request URI for a
-servlet appear in the list of filter-mapping elements.The filter-name
-value must be the value of the <filter-name> sub-elements of one of the
-<filter> declarations in the deployment descriptor.
-
-Used in: web-app
--->
-<!--
-The logical name of the filter. This name is used to map the filter.
-Each filter name is unique within the web application.
-
-Used in: filter, filter-mapping
--->
-<!--
-The form-error-page element defines the location in the web app
-where the error page that is displayed when login is not successful
-can be found. The path begins with a leading / and is interpreted
-relative to the root of the WAR.
-
-Used in: form-login-config
--->
-<!--
-The form-login-config element specifies the login and error pages
-that should be used in form based login. If form based authentication
-is not used, these elements are ignored.
-
-Used in: login-config
--->
-<!--
-The form-login-page element defines the location in the web app
-where the page that can be used for login can be found. The path
-begins with a leading / and is interpreted relative to the root of the WAR.
-
-Used in: form-login-config
--->
-<!--
-The home element contains the fully-qualified name of the enterprise
-bean's home interface.
-
-Used in: ejb-ref
-
-Example:
-
-<home>com.aardvark.payroll.PayrollHome</home>
--->
-<!--
-The http-method contains an HTTP method (GET | POST |...).
-
-Used in: web-resource-collection
--->
-<!--
-The icon element contains small-icon and large-icon elements that
-specify the file names for small and a large GIF or JPEG icon images
-used to represent the parent element in a GUI tool.
-
-Used in: filter, servlet, web-app
--->
-<!--
-The init-param element contains a name/value pair as an
-initialization param of the servlet
-
-Used in: filter, servlet
--->
-<!--
-The jsp-file element contains the full path to a JSP file within
-the web application beginning with a `/'.
-
-Used in: servlet
--->
-<!--
-The large-icon element contains the name of a file
-containing a large (32 x 32) icon image. The file
-name is a relative path within the web application's
-war file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: icon
-
-Example:
-
-<large-icon>employee-service-icon32x32.jpg</large-icon>
--->
-<!--
-The listener element indicates the deployment properties for a web
-application listener bean.
-
-Used in: web-app
--->
-<!--
-The listener-class element declares a class in the application must be
-registered as a web application listener bean. The value is the fully qualified classname of the listener class.
-
-
-Used in: listener
--->
-<!--
-The load-on-startup element indicates that this servlet should be
-loaded (instantiated and have its init() called) on the startup
-of the web application. The optional contents of
-these element must be an integer indicating the order in which
-the servlet should be loaded. If the value is a negative integer,
-or the element is not present, the container is free to load the
-servlet whenever it chooses. If the value is a positive integer
-or 0, the container must load and initialize the servlet as the
-application is deployed. The container must guarantee that
-servlets marked with lower integers are loaded before servlets
-marked with higher integers. The container may choose the order
-of loading of servlets with the same load-on-start-up value.
-
-Used in: servlet
--->
-<!--
-
-The local element contains the fully-qualified name of the
-enterprise bean's local interface.
-
-Used in: ejb-local-ref
-
--->
-<!--
-
-The local-home element contains the fully-qualified name of the
-enterprise bean's local home interface.
-
-Used in: ejb-local-ref
--->
-<!--
-The location element contains the location of the resource in the web
-application relative to the root of the web application. The value of
-the location must have a leading `/'.
-
-Used in: error-page
--->
-<!--
-The login-config element is used to configure the authentication
-method that should be used, the realm name that should be used for
-this application, and the attributes that are needed by the form login
-mechanism.
-
-Used in: web-app
--->
-<!--
-The mime-mapping element defines a mapping between an extension
-and a mime type.
-
-Used in: web-app
--->
-<!--
-The mime-type element contains a defined mime type. example:
-"text/plain"
-
-Used in: mime-mapping
--->
-<!--
-The param-name element contains the name of a parameter. Each parameter
-name must be unique in the web application.
-
-
-Used in: context-param, init-param
--->
-<!--
-The param-value element contains the value of a parameter.
-
-Used in: context-param, init-param
--->
-<!--
-The realm name element specifies the realm name to use in HTTP
-Basic authorization.
-
-Used in: login-config
--->
-<!--
-The remote element contains the fully-qualified name of the enterprise
-bean's remote interface.
-
-Used in: ejb-ref
-
-Example:
-
-<remote>com.wombat.empl.EmployeeService</remote>
--->
-<!--
-The res-auth element specifies whether the web application code signs
-on programmatically to the resource manager, or whether the Container
-will sign on to the resource manager on behalf of the web application. In the
-latter case, the Container uses information that is supplied by the
-Deployer.
-
-The value of this element must be one of the two following:
-
-	<res-auth>Application</res-auth>
-	<res-auth>Container</res-auth>
-
-Used in: resource-ref
--->
-<!--
-The res-ref-name element specifies the name of a resource manager
-connection factory reference.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within a web application.
-
-Used in: resource-ref
--->
-<!--
-The res-sharing-scope element specifies whether connections obtained
-through the given resource manager connection factory reference can be
-shared. The value of this element, if specified, must be one of the
-two following:
-
-	<res-sharing-scope>Shareable</res-sharing-scope>
-	<res-sharing-scope>Unshareable</res-sharing-scope>
-
-The default value is Shareable.
-
-Used in: resource-ref
--->
-<!--
-The res-type element specifies the type of the data source. The type
-is specified by the fully qualified Java language class or interface
-expected to be implemented by the data source.
-
-Used in: resource-ref
--->
-<!--
-The resource-env-ref element contains a declaration of a web application's
-reference to an administered object associated with a resource
-in the web application's environment.  It consists of an optional
-description, the resource environment reference name, and an
-indication of the resource environment reference type expected by
-the web application code.
-
-Used in: web-app
-
-Example:
-
-<resource-env-ref>
-    <resource-env-ref-name>jms/StockQueue</resource-env-ref-name>
-    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
-</resource-env-ref>
--->
-<!--
-The resource-env-ref-name element specifies the name of a resource
-environment reference; its value is the environment entry name used in
-the web application code.  The name is a JNDI name relative to the
-java:comp/env context and must be unique within a web application.
-
-Used in: resource-env-ref
--->
-<!--
-The resource-env-ref-type element specifies the type of a resource
-environment reference.  It is the fully qualified name of a Java
-language class or interface.
-
-Used in: resource-env-ref
--->
-<!--
-The resource-ref element contains a declaration of a web application's
-reference to an external resource. It consists of an optional
-description, the resource manager connection factory reference name,
-the indication of the resource manager connection factory type
-expected by the web application code, the type of authentication
-(Application or Container), and an optional specification of the
-shareability of connections obtained from the resource (Shareable or
-Unshareable).
-
-Used in: web-app
-
-Example:
-
-    <resource-ref>
-	<res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
-	<res-type>javax.sql.DataSource</res-type>
-	<res-auth>Container</res-auth>
-	<res-sharing-scope>Shareable</res-sharing-scope>
-    </resource-ref>
--->
-<!--
-The role-link element is a reference to a defined security role. The
-role-link element must contain the name of one of the security roles
-defined in the security-role elements.
-
-Used in: security-role-ref
--->
-<!--
-The role-name element contains the name of a security role.
-
-The name must conform to the lexical rules for an NMTOKEN.
-
-Used in: auth-constraint, run-as, security-role, security-role-ref
--->
-<!--
-The run-as element specifies the run-as identity to be used for the
-execution of the web application. It contains an optional description, and
-the name of a security role.
-
-Used in: servlet
--->
-<!--
-The security-constraint element is used to associate security
-constraints with one or more web resource collections
-
-Used in: web-app
--->
-<!--
-The security-role element contains the definition of a security
-role. The definition consists of an optional description of the
-security role, and the security role name.
-
-Used in: web-app
-
-Example:
-
-    <security-role>
-	<description>
-	    This role includes all employees who are authorized
-	    to access the employee service application.
-	</description>
-	<role-name>employee</role-name>
-    </security-role>
--->
-<!--
-The security-role-ref element contains the declaration of a security
-role reference in the web application's code. The declaration consists
-of an optional description, the security role name used in the code,
-and an optional link to a security role. If the security role is not
-specified, the Deployer must choose an appropriate security role.
-
-The value of the role-name element must be the String used as the
-parameter to the EJBContext.isCallerInRole(String roleName) method
-or the HttpServletRequest.isUserInRole(String role) method.
-
-Used in: servlet
-
--->
-<!--
-The servlet element contains the declarative data of a
-servlet. If a jsp-file is specified and the load-on-startup element is
-present, then the JSP should be precompiled and loaded.
-
-Used in: web-app
--->
-<!--
-The servlet-class element contains the fully qualified class name
-of the servlet.
-
-Used in: servlet
--->
-<!--
-The servlet-mapping element defines a mapping between a servlet
-and a url pattern
-
-Used in: web-app
--->
-<!--
-The servlet-name element contains the canonical name of the
-servlet. Each servlet name is unique within the web application.
-
-Used in: filter-mapping, servlet, servlet-mapping
--->
-<!--
-The session-config element defines the session parameters for
-this web application.
-
-Used in: web-app
--->
-<!--
-The session-timeout element defines the default session timeout
-interval for all sessions created in this web application. The
-specified timeout must be expressed in a whole number of minutes.
-If the timeout is 0 or less, the container ensures the default
-behaviour of sessions is never to time out.
-
-Used in: session-config
--->
-<!--
-The small-icon element contains the name of a file
-containing a small (16 x 16) icon image. The file
-name is a relative path within the web application's
-war file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: icon
-
-Example:
-
-<small-icon>employee-service-icon16x16.jpg</small-icon>
--->
-<!--
-The taglib element is used to describe a JSP tag library.
-
-Used in: web-app
--->
-<!--
-the taglib-location element contains the location (as a resource
-relative to the root of the web application) where to find the Tag
-Libary Description file for the tag library.
-
-Used in: taglib
--->
-<!--
-The taglib-uri element describes a URI, relative to the location
-of the web.xml document, identifying a Tag Library used in the Web
-Application.
-
-Used in: taglib
--->
-<!--
-The transport-guarantee element specifies that the communication
-between client and server should be NONE, INTEGRAL, or
-CONFIDENTIAL. NONE means that the application does not require any
-transport guarantees. A value of INTEGRAL means that the application
-requires that the data sent between the client and server be sent in
-such a way that it can't be changed in transit. CONFIDENTIAL means
-that the application requires that the data be transmitted in a
-fashion that prevents other entities from observing the contents of
-the transmission. In most cases, the presence of the INTEGRAL or
-CONFIDENTIAL flag will indicate that the use of SSL is required.
-
-Used in: user-data-constraint
--->
-<!--
-The url-pattern element contains the url pattern of the mapping. Must
-follow the rules specified in Section 11.2 of the Servlet API
-Specification.
-
-Used in: filter-mapping, servlet-mapping, web-resource-collection
--->
-<!--
-The user-data-constraint element is used to indicate how data
-communicated between the client and container should be protected.
-
-Used in: security-constraint
--->
-<!--
-The web-resource-collection element is used to identify a subset
-of the resources and HTTP methods on those resources within a web
-application to which a security constraint applies. If no HTTP methods
-are specified, then the security constraint applies to all HTTP
-methods.
-
-Used in: security-constraint
--->
-<!--
-The web-resource-name contains the name of this web resource
-collection.
-
-Used in: web-resource-collection
--->
-<!--
-The welcome-file element contains file name to use as a default
-welcome file, such as index.html
-
-Used in: welcome-file-list
--->
-<!--
-The welcome-file-list contains an ordered list of welcome files
-elements.
-
-Used in: web-app
--->
-<!--
-The ID mechanism is to allow tools that produce additional deployment
-information (i.e., information beyond the standard deployment
-descriptor information) to store the non-standard information in a
-separate file, and easily refer from these tool-specific files to the
-information in the standard deployment descriptor.
-
-Tools are not allowed to add the non-standard information into the
-standard deployment descriptor.
--->
-<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:web="http://xmlns.jcp.org/xml/ns/javaee" xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
-  <display-name>DaoAdresseService</display-name>
-  <description></description>
-  <welcome-file-list>
-    <welcome-file>index.html</welcome-file>
-    <welcome-file>index.jsp</welcome-file>
-  </welcome-file-list>
-  <resource-ref>
-    <description>MySQL fulddaekning on info.dao.int</description>
-    <res-ref-name>jdbc/fulddaekning</res-ref-name>
-    <res-type>javax.sql.DataSource</res-type>
-    <res-auth>Container</res-auth>
-  </resource-ref>
-  <filter>
-    <filter-name>SetCharacterEncoding</filter-name>
-    <filter-class>org.apache.catalina.filters.SetCharacterEncodingFilter</filter-class>
-    <init-param>
-      <param-name>encoding</param-name>
-      <param-value>UTF-8</param-value>
-    </init-param>
-  </filter>
-  <filter-mapping>
-    <filter-name>SetCharacterEncoding</filter-name>
-    <url-pattern>/*</url-pattern>
-  </filter-mapping>
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
+
+Copyright 2000-2007 Sun Microsystems, Inc. All rights reserved.
+
+The contents of this file are subject to the terms of either the GNU
+General Public License Version 2 only ("GPL") or the Common Development
+and Distribution License("CDDL") (collectively, the "License").  You
+may not use this file except in compliance with the License. You can obtain
+a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
+or glassfish/bootstrap/legal/LICENSE.txt.  See the License for the specific
+language governing permissions and limitations under the License.
+
+When distributing the software, include this License Header Notice in each
+file and include the License file at glassfish/bootstrap/legal/LICENSE.txt.
+Sun designates this particular file as subject to the "Classpath" exception
+as provided by Sun in the GPL Version 2 section of the License file that
+accompanied this code.  If applicable, add the following below the License
+Header, with the fields enclosed by brackets [] replaced by your own
+identifying information: "Portions Copyrighted [year]
+[name of copyright owner]"
+
+Contributor(s):
+
+If you wish your version of this file to be governed by only the CDDL or
+only the GPL Version 2, indicate your decision by adding "[Contributor]
+elects to include this software in this distribution under the [CDDL or GPL
+Version 2] license."  If you don't indicate a single choice of license, a
+recipient has the option to distribute your version of this file under
+either the CDDL, the GPL Version 2 or to extend the choice of license to
+its licensees as provided above.  However, if you add GPL Version 2 code
+and therefore, elected the GPL Version 2 license, then the option applies
+only if the new code is made subject to such option by the copyright
+holder.
+-->
+<!--
+This is the XML DTD for the Servlet 2.3 deployment descriptor.
+All Servlet 2.3 deployment descriptors must include a DOCTYPE
+of the following form:
+
+  <!DOCTYPE web-app PUBLIC
+	"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
+	"http://java.sun.com/dtd/web-app_2_3.dtd">
+
+-->
+<!--
+The following conventions apply to all J2EE deployment descriptor
+elements unless indicated otherwise.
+
+- In elements that contain PCDATA, leading and trailing whitespace
+  in the data may be ignored.
+
+- In elements whose value is an "enumerated type", the value is
+  case sensitive.
+
+- In elements that specify a pathname to a file within the same
+  JAR file, relative filenames (i.e., those not starting with "/")
+  are considered relative to the root of the JAR file's namespace.
+  Absolute filenames (i.e., those starting with "/") also specify
+  names in the root of the JAR file's namespace.  In general, relative
+  names are preferred.  The exception is .war files where absolute
+  names are preferred for consistency with the servlet API.
+-->
+<!--
+The web-app element is the root of the deployment descriptor for
+a web application.
+-->
+<!--
+The auth-constraint element indicates the user roles that should
+be permitted access to this resource collection. The role-name
+used here must either correspond to the role-name of one of the
+security-role elements defined for this web application, or be
+the specially reserved role-name "*" that is a compact syntax for
+indicating all roles in the web application. If both "*" and
+rolenames appear, the container interprets this as all roles.
+If no roles are defined, no user is allowed access to the portion of
+the web application described by the containing security-constraint.
+The container matches role names case sensitively when determining
+access.
+
+
+Used in: security-constraint
+-->
+<!--
+The auth-method element is used to configure the authentication
+mechanism for the web application. As a prerequisite to gaining access to any web resources which are protected by an authorization
+constraint, a user must have authenticated using the configured
+mechanism. Legal values for this element are "BASIC", "DIGEST",
+"FORM", or "CLIENT-CERT".
+
+Used in: login-config
+-->
+<!--
+The context-param element contains the declaration of a web
+application's servlet context initialization parameters.
+
+Used in: web-app
+-->
+<!--
+The description element is used to provide text describing the parent
+element.  The description element should include any information that
+the web application war file producer wants to provide to the consumer of
+the web application war file (i.e., to the Deployer). Typically, the tools
+used by the web application war file consumer will display the description
+when processing the parent element that contains the description.
+
+Used in: auth-constraint, context-param, ejb-local-ref, ejb-ref,
+env-entry, filter, init-param, resource-env-ref, resource-ref, run-as,
+security-role, security-role-ref, servlet, user-data-constraint,
+web-app, web-resource-collection
+-->
+<!--
+The display-name element contains a short name that is intended to be
+displayed by tools.  The display name need not be unique.
+
+Used in: filter, security-constraint, servlet, web-app
+
+Example:
+
+<display-name>Employee Self Service</display-name>
+-->
+<!--
+The distributable element, by its presence in a web application
+deployment descriptor, indicates that this web application is
+programmed appropriately to be deployed into a distributed servlet
+container
+
+Used in: web-app
+-->
+<!--
+The ejb-link element is used in the ejb-ref or ejb-local-ref
+elements to specify that an EJB reference is linked to an
+enterprise bean.
+
+The name in the ejb-link element is composed of a
+path name specifying the ejb-jar containing the referenced enterprise
+bean with the ejb-name of the target bean appended and separated from
+the path name by "#".  The path name is relative to the war file
+containing the web application that is referencing the enterprise bean.
+This allows multiple enterprise beans with the same ejb-name to be
+uniquely identified.
+
+Used in: ejb-local-ref, ejb-ref
+
+Examples:
+
+	<ejb-link>EmployeeRecord</ejb-link>
+
+	<ejb-link>../products/product.jar#ProductEJB</ejb-link>
+
+-->
+<!--
+The ejb-local-ref element is used for the declaration of a reference to
+an enterprise bean's local home. The declaration consists of:
+
+	- an optional description
+	- the EJB reference name used in the code of the web application
+	  that's referencing the enterprise bean
+	- the expected type of the referenced enterprise bean
+	- the expected local home and local interfaces of the referenced
+	  enterprise bean
+	- optional ejb-link information, used to specify the referenced
+	  enterprise bean
+
+Used in: web-app
+-->
+<!--
+The ejb-ref element is used for the declaration of a reference to
+an enterprise bean's home. The declaration consists of:
+
+	- an optional description
+	- the EJB reference name used in the code of
+	  the web application that's referencing the enterprise bean
+	- the expected type of the referenced enterprise bean
+	- the expected home and remote interfaces of the referenced
+	  enterprise bean
+	- optional ejb-link information, used to specify the referenced
+	  enterprise bean
+
+Used in: web-app
+-->
+<!--
+The ejb-ref-name element contains the name of an EJB reference. The
+EJB reference is an entry in the web application's environment and is
+relative to the java:comp/env context.  The name must be unique
+within the web application.
+
+It is recommended that name is prefixed with "ejb/".
+
+Used in: ejb-local-ref, ejb-ref
+
+Example:
+
+<ejb-ref-name>ejb/Payroll</ejb-ref-name>
+-->
+<!--
+The ejb-ref-type element contains the expected type of the
+referenced enterprise bean.
+
+The ejb-ref-type element must be one of the following:
+
+	<ejb-ref-type>Entity</ejb-ref-type>
+	<ejb-ref-type>Session</ejb-ref-type>
+
+Used in: ejb-local-ref, ejb-ref
+-->
+<!--
+The env-entry element contains the declaration of a web application's
+environment entry. The declaration consists of an optional
+description, the name of the environment entry, and an optional
+value.  If a value is not specified, one must be supplied
+during deployment.
+-->
+<!--
+The env-entry-name element contains the name of a web applications's
+environment entry.  The name is a JNDI name relative to the
+java:comp/env context.  The name must be unique within a web application.
+
+Example:
+
+<env-entry-name>minAmount</env-entry-name>
+
+Used in: env-entry
+-->
+<!--
+The env-entry-type element contains the fully-qualified Java type of
+the environment entry value that is expected by the web application's
+code.
+
+The following are the legal values of env-entry-type:
+
+	java.lang.Boolean
+	java.lang.Byte
+	java.lang.Character
+	java.lang.String
+	java.lang.Short
+	java.lang.Integer
+	java.lang.Long
+	java.lang.Float
+	java.lang.Double
+
+Used in: env-entry
+-->
+<!--
+The env-entry-value element contains the value of a web application's
+environment entry. The value must be a String that is valid for the
+constructor of the specified type that takes a single String
+parameter, or for java.lang.Character, a single character.
+
+Example:
+
+<env-entry-value>100.00</env-entry-value>
+
+Used in: env-entry
+-->
+<!--
+The error-code contains an HTTP error code, ex: 404
+
+Used in: error-page
+-->
+<!--
+The error-page element contains a mapping between an error code
+or exception type to the path of a resource in the web application
+
+Used in: web-app
+-->
+<!--
+The exception type contains a fully qualified class name of a
+Java exception type.
+
+Used in: error-page
+-->
+<!--
+The extension element contains a string describing an
+extension. example: "txt"
+
+Used in: mime-mapping
+-->
+<!--
+Declares a filter in the web application. The filter is mapped to
+either a servlet or a URL pattern in the filter-mapping element, using
+the filter-name value to reference. Filters can access the
+initialization parameters declared in the deployment descriptor at
+runtime via the FilterConfig interface.
+
+Used in: web-app
+-->
+<!--
+The fully qualified classname of the filter.
+
+Used in: filter
+-->
+<!--
+Declaration of the filter mappings in this web application. The
+container uses the filter-mapping declarations to decide which filters
+to apply to a request, and in what order. The container matches the
+request URI to a Servlet in the normal way. To determine which filters
+to apply it matches filter-mapping declarations either on servlet-name,
+or on url-pattern for each filter-mapping element, depending on which
+style is used. The order in which filters are invoked is the order in
+which filter-mapping declarations that match a request URI for a
+servlet appear in the list of filter-mapping elements.The filter-name
+value must be the value of the <filter-name> sub-elements of one of the
+<filter> declarations in the deployment descriptor.
+
+Used in: web-app
+-->
+<!--
+The logical name of the filter. This name is used to map the filter.
+Each filter name is unique within the web application.
+
+Used in: filter, filter-mapping
+-->
+<!--
+The form-error-page element defines the location in the web app
+where the error page that is displayed when login is not successful
+can be found. The path begins with a leading / and is interpreted
+relative to the root of the WAR.
+
+Used in: form-login-config
+-->
+<!--
+The form-login-config element specifies the login and error pages
+that should be used in form based login. If form based authentication
+is not used, these elements are ignored.
+
+Used in: login-config
+-->
+<!--
+The form-login-page element defines the location in the web app
+where the page that can be used for login can be found. The path
+begins with a leading / and is interpreted relative to the root of the WAR.
+
+Used in: form-login-config
+-->
+<!--
+The home element contains the fully-qualified name of the enterprise
+bean's home interface.
+
+Used in: ejb-ref
+
+Example:
+
+<home>com.aardvark.payroll.PayrollHome</home>
+-->
+<!--
+The http-method contains an HTTP method (GET | POST |...).
+
+Used in: web-resource-collection
+-->
+<!--
+The icon element contains small-icon and large-icon elements that
+specify the file names for small and a large GIF or JPEG icon images
+used to represent the parent element in a GUI tool.
+
+Used in: filter, servlet, web-app
+-->
+<!--
+The init-param element contains a name/value pair as an
+initialization param of the servlet
+
+Used in: filter, servlet
+-->
+<!--
+The jsp-file element contains the full path to a JSP file within
+the web application beginning with a `/'.
+
+Used in: servlet
+-->
+<!--
+The large-icon element contains the name of a file
+containing a large (32 x 32) icon image. The file
+name is a relative path within the web application's
+war file.
+
+The image may be either in the JPEG or GIF format.
+The icon can be used by tools.
+
+Used in: icon
+
+Example:
+
+<large-icon>employee-service-icon32x32.jpg</large-icon>
+-->
+<!--
+The listener element indicates the deployment properties for a web
+application listener bean.
+
+Used in: web-app
+-->
+<!--
+The listener-class element declares a class in the application must be
+registered as a web application listener bean. The value is the fully qualified classname of the listener class.
+
+
+Used in: listener
+-->
+<!--
+The load-on-startup element indicates that this servlet should be
+loaded (instantiated and have its init() called) on the startup
+of the web application. The optional contents of
+these element must be an integer indicating the order in which
+the servlet should be loaded. If the value is a negative integer,
+or the element is not present, the container is free to load the
+servlet whenever it chooses. If the value is a positive integer
+or 0, the container must load and initialize the servlet as the
+application is deployed. The container must guarantee that
+servlets marked with lower integers are loaded before servlets
+marked with higher integers. The container may choose the order
+of loading of servlets with the same load-on-start-up value.
+
+Used in: servlet
+-->
+<!--
+
+The local element contains the fully-qualified name of the
+enterprise bean's local interface.
+
+Used in: ejb-local-ref
+
+-->
+<!--
+
+The local-home element contains the fully-qualified name of the
+enterprise bean's local home interface.
+
+Used in: ejb-local-ref
+-->
+<!--
+The location element contains the location of the resource in the web
+application relative to the root of the web application. The value of
+the location must have a leading `/'.
+
+Used in: error-page
+-->
+<!--
+The login-config element is used to configure the authentication
+method that should be used, the realm name that should be used for
+this application, and the attributes that are needed by the form login
+mechanism.
+
+Used in: web-app
+-->
+<!--
+The mime-mapping element defines a mapping between an extension
+and a mime type.
+
+Used in: web-app
+-->
+<!--
+The mime-type element contains a defined mime type. example:
+"text/plain"
+
+Used in: mime-mapping
+-->
+<!--
+The param-name element contains the name of a parameter. Each parameter
+name must be unique in the web application.
+
+
+Used in: context-param, init-param
+-->
+<!--
+The param-value element contains the value of a parameter.
+
+Used in: context-param, init-param
+-->
+<!--
+The realm name element specifies the realm name to use in HTTP
+Basic authorization.
+
+Used in: login-config
+-->
+<!--
+The remote element contains the fully-qualified name of the enterprise
+bean's remote interface.
+
+Used in: ejb-ref
+
+Example:
+
+<remote>com.wombat.empl.EmployeeService</remote>
+-->
+<!--
+The res-auth element specifies whether the web application code signs
+on programmatically to the resource manager, or whether the Container
+will sign on to the resource manager on behalf of the web application. In the
+latter case, the Container uses information that is supplied by the
+Deployer.
+
+The value of this element must be one of the two following:
+
+	<res-auth>Application</res-auth>
+	<res-auth>Container</res-auth>
+
+Used in: resource-ref
+-->
+<!--
+The res-ref-name element specifies the name of a resource manager
+connection factory reference.  The name is a JNDI name relative to the
+java:comp/env context.  The name must be unique within a web application.
+
+Used in: resource-ref
+-->
+<!--
+The res-sharing-scope element specifies whether connections obtained
+through the given resource manager connection factory reference can be
+shared. The value of this element, if specified, must be one of the
+two following:
+
+	<res-sharing-scope>Shareable</res-sharing-scope>
+	<res-sharing-scope>Unshareable</res-sharing-scope>
+
+The default value is Shareable.
+
+Used in: resource-ref
+-->
+<!--
+The res-type element specifies the type of the data source. The type
+is specified by the fully qualified Java language class or interface
+expected to be implemented by the data source.
+
+Used in: resource-ref
+-->
+<!--
+The resource-env-ref element contains a declaration of a web application's
+reference to an administered object associated with a resource
+in the web application's environment.  It consists of an optional
+description, the resource environment reference name, and an
+indication of the resource environment reference type expected by
+the web application code.
+
+Used in: web-app
+
+Example:
+
+<resource-env-ref>
+    <resource-env-ref-name>jms/StockQueue</resource-env-ref-name>
+    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
+</resource-env-ref>
+-->
+<!--
+The resource-env-ref-name element specifies the name of a resource
+environment reference; its value is the environment entry name used in
+the web application code.  The name is a JNDI name relative to the
+java:comp/env context and must be unique within a web application.
+
+Used in: resource-env-ref
+-->
+<!--
+The resource-env-ref-type element specifies the type of a resource
+environment reference.  It is the fully qualified name of a Java
+language class or interface.
+
+Used in: resource-env-ref
+-->
+<!--
+The resource-ref element contains a declaration of a web application's
+reference to an external resource. It consists of an optional
+description, the resource manager connection factory reference name,
+the indication of the resource manager connection factory type
+expected by the web application code, the type of authentication
+(Application or Container), and an optional specification of the
+shareability of connections obtained from the resource (Shareable or
+Unshareable).
+
+Used in: web-app
+
+Example:
+
+    <resource-ref>
+	<res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
+	<res-type>javax.sql.DataSource</res-type>
+	<res-auth>Container</res-auth>
+	<res-sharing-scope>Shareable</res-sharing-scope>
+    </resource-ref>
+-->
+<!--
+The role-link element is a reference to a defined security role. The
+role-link element must contain the name of one of the security roles
+defined in the security-role elements.
+
+Used in: security-role-ref
+-->
+<!--
+The role-name element contains the name of a security role.
+
+The name must conform to the lexical rules for an NMTOKEN.
+
+Used in: auth-constraint, run-as, security-role, security-role-ref
+-->
+<!--
+The run-as element specifies the run-as identity to be used for the
+execution of the web application. It contains an optional description, and
+the name of a security role.
+
+Used in: servlet
+-->
+<!--
+The security-constraint element is used to associate security
+constraints with one or more web resource collections
+
+Used in: web-app
+-->
+<!--
+The security-role element contains the definition of a security
+role. The definition consists of an optional description of the
+security role, and the security role name.
+
+Used in: web-app
+
+Example:
+
+    <security-role>
+	<description>
+	    This role includes all employees who are authorized
+	    to access the employee service application.
+	</description>
+	<role-name>employee</role-name>
+    </security-role>
+-->
+<!--
+The security-role-ref element contains the declaration of a security
+role reference in the web application's code. The declaration consists
+of an optional description, the security role name used in the code,
+and an optional link to a security role. If the security role is not
+specified, the Deployer must choose an appropriate security role.
+
+The value of the role-name element must be the String used as the
+parameter to the EJBContext.isCallerInRole(String roleName) method
+or the HttpServletRequest.isUserInRole(String role) method.
+
+Used in: servlet
+
+-->
+<!--
+The servlet element contains the declarative data of a
+servlet. If a jsp-file is specified and the load-on-startup element is
+present, then the JSP should be precompiled and loaded.
+
+Used in: web-app
+-->
+<!--
+The servlet-class element contains the fully qualified class name
+of the servlet.
+
+Used in: servlet
+-->
+<!--
+The servlet-mapping element defines a mapping between a servlet
+and a url pattern
+
+Used in: web-app
+-->
+<!--
+The servlet-name element contains the canonical name of the
+servlet. Each servlet name is unique within the web application.
+
+Used in: filter-mapping, servlet, servlet-mapping
+-->
+<!--
+The session-config element defines the session parameters for
+this web application.
+
+Used in: web-app
+-->
+<!--
+The session-timeout element defines the default session timeout
+interval for all sessions created in this web application. The
+specified timeout must be expressed in a whole number of minutes.
+If the timeout is 0 or less, the container ensures the default
+behaviour of sessions is never to time out.
+
+Used in: session-config
+-->
+<!--
+The small-icon element contains the name of a file
+containing a small (16 x 16) icon image. The file
+name is a relative path within the web application's
+war file.
+
+The image may be either in the JPEG or GIF format.
+The icon can be used by tools.
+
+Used in: icon
+
+Example:
+
+<small-icon>employee-service-icon16x16.jpg</small-icon>
+-->
+<!--
+The taglib element is used to describe a JSP tag library.
+
+Used in: web-app
+-->
+<!--
+the taglib-location element contains the location (as a resource
+relative to the root of the web application) where to find the Tag
+Libary Description file for the tag library.
+
+Used in: taglib
+-->
+<!--
+The taglib-uri element describes a URI, relative to the location
+of the web.xml document, identifying a Tag Library used in the Web
+Application.
+
+Used in: taglib
+-->
+<!--
+The transport-guarantee element specifies that the communication
+between client and server should be NONE, INTEGRAL, or
+CONFIDENTIAL. NONE means that the application does not require any
+transport guarantees. A value of INTEGRAL means that the application
+requires that the data sent between the client and server be sent in
+such a way that it can't be changed in transit. CONFIDENTIAL means
+that the application requires that the data be transmitted in a
+fashion that prevents other entities from observing the contents of
+the transmission. In most cases, the presence of the INTEGRAL or
+CONFIDENTIAL flag will indicate that the use of SSL is required.
+
+Used in: user-data-constraint
+-->
+<!--
+The url-pattern element contains the url pattern of the mapping. Must
+follow the rules specified in Section 11.2 of the Servlet API
+Specification.
+
+Used in: filter-mapping, servlet-mapping, web-resource-collection
+-->
+<!--
+The user-data-constraint element is used to indicate how data
+communicated between the client and container should be protected.
+
+Used in: security-constraint
+-->
+<!--
+The web-resource-collection element is used to identify a subset
+of the resources and HTTP methods on those resources within a web
+application to which a security constraint applies. If no HTTP methods
+are specified, then the security constraint applies to all HTTP
+methods.
+
+Used in: security-constraint
+-->
+<!--
+The web-resource-name contains the name of this web resource
+collection.
+
+Used in: web-resource-collection
+-->
+<!--
+The welcome-file element contains file name to use as a default
+welcome file, such as index.html
+
+Used in: welcome-file-list
+-->
+<!--
+The welcome-file-list contains an ordered list of welcome files
+elements.
+
+Used in: web-app
+-->
+<!--
+The ID mechanism is to allow tools that produce additional deployment
+information (i.e., information beyond the standard deployment
+descriptor information) to store the non-standard information in a
+separate file, and easily refer from these tool-specific files to the
+information in the standard deployment descriptor.
+
+Tools are not allowed to add the non-standard information into the
+standard deployment descriptor.
+-->
+<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:web="http://xmlns.jcp.org/xml/ns/javaee" xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
+  <display-name>DaoAdresseService</display-name>
+  <description></description>
+  <welcome-file-list>
+    <welcome-file>index.html</welcome-file>
+    <welcome-file>index.jsp</welcome-file>
+  </welcome-file-list>
+  <resource-ref>
+    <description>MySQL fulddaekning on info.dao.int</description>
+    <res-ref-name>jdbc/fulddaekning</res-ref-name>
+    <res-type>javax.sql.DataSource</res-type>
+    <res-auth>Container</res-auth>
+  </resource-ref>
+  <filter>
+    <filter-name>SetCharacterEncoding</filter-name>
+    <filter-class>org.apache.catalina.filters.SetCharacterEncodingFilter</filter-class>
+    <init-param>
+      <param-name>encoding</param-name>
+      <param-value>UTF-8</param-value>
+    </init-param>
+  </filter>
+  <filter-mapping>
+    <filter-name>SetCharacterEncoding</filter-name>
+    <url-pattern>/*</url-pattern>
+  </filter-mapping>
 </web-app>
\ No newline at end of file