--- trunk/Embedded/main.c	2007/12/09 21:47:39	207
+++ trunk/Embedded/main.c	2007/12/10 08:02:13	213
@@ -16,8 +16,8 @@
 
 unsigned char global_Pot_Hi, global_Pot_Lo;
 unsigned char global_serial_send[BUFFER], global_serial_recieve_buffer[BUFFER];
-bit global_recieve_done = 0; //, global_interval_changed = 0;
-unsigned int global_serial_byte_counter = 0, global_sms_counter = 1, global_time_counter = 0; //,  global_time_counter_image = 0;
+bit global_recieve_done = 0;
+unsigned int global_serial_byte_counter = 0, global_sms_counter = 1, global_time_counter = 0; 
 unsigned int global_emergency_counter = 600, global_time_interval = 3600;
 unsigned char global_temp = 0;
 
@@ -59,9 +59,7 @@
 	global_recieve_done = 0;
 	
 	global_message_buffer_length1 = 0;
-	//global_message_buffer1[0] = 0;	
 	global_message_buffer_length2 = 0;
-	//global_message_buffer2[0] = 0;	
 	
 	memset(global_message_buffer1, 0, BUFFER);
 	memset(global_message_buffer2, 0, BUFFER);
@@ -86,8 +84,8 @@
 	ADCS1 = 0;
 	ADCS2 = 0;
 
-	//Select AN0/RA0 for AD source
-		// In this (000) setup, it's only RA0/AN0 that does ad convertion.
+	//Select AN0/RA0 for AD source.
+	// In this (000) setup, it's only RA0/AN0 that does ad convertion.
 	CHS0=0;
 	CHS1=0;
 	CHS2=0;
@@ -126,16 +124,16 @@
 
 void timer_init(void)
 {
-	TMR1CS = 1; //use external clock
+	TMR1CS = 1;	//use external clock
 	
-	T1CKPS1 = 1; //1:8 prescale
+	T1CKPS1 = 1;	//1:8 prescale
 	T1CKPS0 = 1;
 	
 	TMR1H = 0xEF;
 	TMR1L = 0xFF;
 
-	T1OSCEN = 1; //enable oscillator circuit	
-	RD16 = 0; //normal 8 bit writes
+	T1OSCEN = 1;	//enable oscillator circuit	
+	RD16 = 0;	//normal 8 bit writes
 	TMR1ON = 1;
 }
 	
@@ -218,21 +216,9 @@
 
 void on_initial_recieve(void)
 {
-// can't se what the outcommented lines in here sould do, that make any sence.
-//	char imei[16];
-//	char* ptr;
-//	char i;
-//	char buf[2];
-	
 	if (strstr(global_serial_recieve_buffer,"+WIND: 11") != 0)
 	{
 		global_modem_init = 1;
-
-//		ptr = strstr(global_serial_recieve_buffer,"cgsn");
-//		ptr +=4;
-//		strncpy(imei, ptr,15);
-//		imei[15] = 0;
-		
 		reset_recieve_buffer();
 	}
 }
@@ -493,7 +479,7 @@
 	DelayMs(50);
 	reset_recieve_buffer();
 
-	RA5 = 0;			// Inits are done, and RA1 will now work as a error notifier.
+	RA5 = 0;		// Inits are done, and RA1 will now work as a error notifier.
 
 	while(1)
 	{
@@ -514,13 +500,6 @@
 		if( global_emergency_counter > 7200 )
 			global_emergency_counter = 600;
 
-// the outcommented lines are useless, because eeprom_writer() is called from sms_recieved() when the conf sms has been decoded.
-	// Checks if there has been recieved a config sms.
-//		if(global_interval_changed )
-//		{
-//			eeprom_writer();
-//			global_interval_changed = 0;
-//		}
 	// Checking if A/D convertion is done, and save the data in global_Pot_??
 		if(GODONE==0)
 		{