| 1 |
* This is a MIB description for Microchip TCP/IP Stack.
|
| 2 |
* Anyline starting without '$' is a comment.
|
| 3 |
* Line starting with $ is a command and first word after $ must be
|
| 4 |
* a valid command string.
|
| 5 |
*
|
| 6 |
* Use mib2bib to compile this file and generate binary BIB file.
|
| 7 |
*
|
| 8 |
* v1.0 supports following commands
|
| 9 |
* $DeclareVar(<oidName>, <dataType>, <oidType>, <access>, <oidString>)
|
| 10 |
*
|
| 11 |
* Author Date Comment
|
| 12 |
* ==========================================================================
|
| 13 |
* Nilesh Rajbharti 5/21/03 Initial (v1.0)
|
| 14 |
*
|
| 15 |
*
|
| 16 |
|
| 17 |
|
| 18 |
DeclareVar(<NodeName>, <NodeDataType>, <NodeType>, <NodeAccess>, <NodeOID>)
|
| 19 |
|
| 20 |
|
| 21 |
****************************************************************************
|
| 22 |
* MIB-2 SYSTEM MIB
|
| 23 |
****************************************************************************
|
| 24 |
$DeclareVar(SYS_NAME, ASCII_STRING, SINGLE, READONLY, 43.6.1.2.1.1.5)
|
| 25 |
$StaticVar(SYS_NAME, PICDEM.net)
|
| 26 |
|
| 27 |
$DeclareVar(SYS_DESCR, ASCII_STRING, SINGLE, READONLY, 43.6.1.2.1.1.1)
|
| 28 |
$StaticVar(SYS_DESCR, PICDEM.net running Microchip SNMP Agent)
|
| 29 |
|
| 30 |
$DeclareVar(SYS_CONTACT, ASCII_STRING, SINGLE, READONLY, 43.6.1.2.1.1.4)
|
| 31 |
$StaticVar(SYS_CONTACT, techsupport@microchip.com)
|
| 32 |
|
| 33 |
$DeclareVar(SYS_LOCATION, ASCII_STRING, SINGLE, READONLY, 43.6.1.2.1.1.6)
|
| 34 |
$StaticVar(SYS_LOCATION, Near Your Desk)
|
| 35 |
|
| 36 |
$DeclareVar(SYS_SERVICES, BYTE, SINGLE, READONLY, 43.6.1.2.1.1.7)
|
| 37 |
$StaticVar(SYS_SERVICES, 7)
|
| 38 |
|
| 39 |
$DeclareVar(SYS_UP_TIME, TIME_TICKS, SINGLE, READONLY, 43.6.1.2.1.1.3)
|
| 40 |
$DynamicVar(SYS_UP_TIME, 250)
|
| 41 |
|
| 42 |
$DeclareVar(MICROCHIP, OID, SINGLE, READONLY, 43.6.1.2.1.1.2)
|
| 43 |
$StaticVar(MICROCHIP, 43.6.1.4.1.17095)
|
| 44 |
|
| 45 |
This declaration is must if this agent is going to send traps out.
|
| 46 |
Application must pass this OID name as one of the parameter when generating
|
| 47 |
trap. Without a valid AgentID definition, SNMPNotify would fail.
|
| 48 |
$AgentID(MICROCHIP, 255)
|
| 49 |
****************************************************************************
|
| 50 |
* END OF MIB-2 SYSTEM MIB
|
| 51 |
****************************************************************************
|
| 52 |
|
| 53 |
|
| 54 |
****************************************************************************
|
| 55 |
* MICROCHIP - PICDEM.net MIB
|
| 56 |
****************************************************************************
|
| 57 |
|
| 58 |
----------------------------------------------------------------------------
|
| 59 |
- microchip.product
|
| 60 |
----------------------------------------------------------------------------
|
| 61 |
$DeclareVar(PRODUCT_NAME, ASCII_STRING, SINGLE, READONLY, 43.6.1.4.1.17095.1.1)
|
| 62 |
$StaticVar(PRODUCT_NAME, Microchip SNMP Agent)
|
| 63 |
|
| 64 |
$DeclareVar(PRODUCT_VERSION, ASCII_STRING, SINGLE, READONLY, 43.6.1.4.1.17095.1.2)
|
| 65 |
$StaticVar(PRODUCT_VERSION, v1.0)
|
| 66 |
|
| 67 |
$DeclareVar(VERSION_DATE, ASCII_STRING, SINGLE, READONLY, 43.6.1.4.1.17095.1.3)
|
| 68 |
$StaticVar(VERSION_DATE, May 2003)
|
| 69 |
|
| 70 |
|
| 71 |
----------------------------------------------------------------------------
|
| 72 |
- microchip.setup
|
| 73 |
----------------------------------------------------------------------------
|
| 74 |
TRAP RECEIVER is table with following format:
|
| 75 |
TRAP_RECEIVER_ID is index.
|
| 76 |
|
| 77 |
-----------------------------------------------------------------------------
|
| 78 |
TRAP_RECEIVER_ID | TRAP_ENABLED | TRAP_RECEIVER_IP | TRAP_COMMUNITY
|
| 79 |
-----------------------------------------------------------------------------
|
| 80 |
0..3 | OFF(0)/ON(0) | X.X.X.X | ASCII_STRING(0..7)
|
| 81 |
------------------------------------------------------------------------------
|
| 82 |
|
| 83 |
$DeclareVar(TRAP_RECEIVER_ID, BYTE, SEQUENCE, READWRITE, 43.6.1.4.1.17095.2.1.1.1)
|
| 84 |
$DynamicVar(TRAP_RECEIVER_ID, 1)
|
| 85 |
$SequenceVar(TRAP_RECEIVER_ID, TRAP_RECEIVER_ID)
|
| 86 |
|
| 87 |
$DeclareVar(TRAP_RECEIVER_ENABLED, BYTE, SEQUENCE, READWRITE, 43.6.1.4.1.17095.2.1.1.2)
|
| 88 |
$DynamicVar(TRAP_RECEIVER_ENABLED, 2)
|
| 89 |
$SequenceVar(TRAP_RECEIVER_ENABLED, TRAP_RECEIVER_ID)
|
| 90 |
|
| 91 |
$DeclareVar(TRAP_RECEIVER_IP, IP_ADDRESS, SEQUENCE, READWRITE, 43.6.1.4.1.17095.2.1.1.3)
|
| 92 |
$DynamicVar(TRAP_RECEIVER_IP, 3)
|
| 93 |
$SequenceVar(TRAP_RECEIVER_IP, TRAP_RECEIVER_ID)
|
| 94 |
|
| 95 |
$DeclareVar(TRAP_COMMUNITY, ASCII_STRING, SEQUENCE, READWRITE, 43.6.1.4.1.17095.2.1.1.4)
|
| 96 |
$DynamicVar(TRAP_COMMUNITY, 4)
|
| 97 |
$SequenceVar(TRAP_COMMUNITY, TRAP_RECEIVER_ID)
|
| 98 |
|
| 99 |
|
| 100 |
----------------------------------------------------------------------------
|
| 101 |
- microchip.control
|
| 102 |
----------------------------------------------------------------------------
|
| 103 |
microchip.control.ledD5
|
| 104 |
$DeclareVar(LED_D5, BYTE, SINGLE, READWRITE, 43.6.1.4.1.17095.3.1)
|
| 105 |
$DynamicVar(LED_D5, 5)
|
| 106 |
|
| 107 |
microchip.control.ledD6
|
| 108 |
$DeclareVar(LED_D6, BYTE, SINGLE, READWRITE, 43.6.1.4.1.17095.3.2)
|
| 109 |
$DynamicVar(LED_D6, 6)
|
| 110 |
|
| 111 |
microchip.control.pushButton
|
| 112 |
$DeclareVar(PUSH_BUTTON, BYTE, SINGLE, READONLY, 43.6.1.4.1.17095.3.3)
|
| 113 |
$DynamicVar(PUSH_BUTTON, 7)
|
| 114 |
|
| 115 |
microchip.control.analogPot0
|
| 116 |
$DeclareVar(ANALOG_POT0, WORD, SINGLE, READONLY, 43.6.1.4.1.17095.3.4)
|
| 117 |
$DynamicVar(ANALOG_POT0, 8)
|
| 118 |
|
| 119 |
microchip.control.analogPot1
|
| 120 |
$DeclareVar(ANALOG_POT1, WORD, SINGLE, READONLY, 43.6.1.4.1.17095.3.5)
|
| 121 |
$DynamicVar(ANALOG_POT1, 9)
|
| 122 |
|
| 123 |
microchip.control.lcdDisplay
|
| 124 |
$DeclareVar(LCD_DISPLAY, ASCII_STRING, SINGLE, READWRITE, 43.6.1.4.1.17095.3.6)
|
| 125 |
$DynamicVar(LCD_DISPLAY, 10)
|
| 126 |
|
| 127 |
****************************************************************************
|
| 128 |
* END OF MICROCHIP - PICDEM.net MIB
|
| 129 |
****************************************************************************
|
| 130 |
|
Parent Directory
| 
Revision Log