PIC/TCP-IP%20stack/delay.h

/*********************************************************************
 *
 *                  General Delay rouines
 *
 *********************************************************************
 * FileName:        delay.c
 * Dependencies:    compiler.h
 * Processor:       PIC18
 * Complier:        MCC18 v1.00.50 or higher
 *                  HITECH PICC-18 V8.10PL1 or higher
 * Company:         Microchip Technology, Inc.
 *
 * Software License Agreement
 *
 * The software supplied herewith by Microchip Technology Incorporated
 * (the “Company”) for its PICmicro® Microcontroller is intended and
 * supplied to you, the Company’s customer, for use solely and
 * exclusively on Microchip PICmicro Microcontroller products. The
 * software is owned by the Company and/or its supplier, and is
 * protected under applicable copyright laws. All rights are reserved.
 * Any use in violation of the foregoing restrictions may subject the
 * user to criminal sanctions under applicable laws, as well as to
 * civil liability for the breach of the terms and conditions of this
 * license.
 *
 * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
 * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
 * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
 * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 *
 * HiTech PICC18 Compiler Options excluding device selection:
 *                  -FAKELOCAL -G -Zg -E -C
 *
 * Note: HITECH portions is adopted from PICC18 sample "delay.c".
 *
 * Author               Date    Comment
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 * Nilesh Rajbharti     5/9/02  Original        (Rev 1.0)
 * Nilesh Rajbharti     6/10/02 Fixed C18 ms and us routines
 ********************************************************************/
#ifndef DELAY_H
#define DELAY_H

#include "compiler.h"

#if defined(MCHP_C18)
#include <delays.h>
#endif

/*
 *  Delay functions for HI-TECH C on the PIC18
 *
 *  Functions available:
 *      DelayUs(x)  Delay specified number of microseconds
 *      DelayMs(x)  Delay specified number of milliseconds
 *
 *  Note that there are range limits:
 *  - on small values of x (i.e. x<10), the delay becomes less
 *  accurate. DelayUs is accurate with xtal frequencies in the
 *  range of 4-16MHZ, where x must not exceed 255.
 *  For xtal frequencies > 16MHz the valid range for DelayUs
 *  is even smaller - hence affecting DelayMs.
 *  To use DelayUs it is only necessary to include this file.
 *  To use DelayMs you must include delay.c in your project.
 *
 *  Note that this is the crystal frequency, the CPU clock is
 *  divided by 4.
 *
 *  MAKE SURE this code is compiled with full optimization!!!
*/
#define MHZ *1


#ifndef CLOCK_FREQ
#error CLOCK_FREQ must be defined.
#endif

#if CLOCK_FREQ < 8MHZ
#define uS_CNT  24 // 238         /* 4x to make 1 mSec */
#endif
#if CLOCK_FREQ == 8MHZ
#define uS_CNT  25 // 244
#else
#define uS_CNT  25 // 246
#endif

#define FREQ_MULT   (CLOCK_FREQ)/(4MHZ)

#if defined(HITECH_C18)
    #define Delay10us(x)                \
    {                                   \
        unsigned char _dcnt;            \
        if(x>=4)                        \
            _dcnt=(x*(FREQ_MULT))/4;    \
        else                            \
            _dcnt=1;                    \
        while(--_dcnt > 0)              \
          continue;                     \
    }


void DelayMs(unsigned char ms);

#elif defined(MCHP_C18)
#define Delay10us(us)                   Delay10TCYx(((CLOCK_FREQ/4000000)*us))
#define DelayMs(ms)                     Delay1KTCYx((((CLOCK_FREQ/1000)*ms)/4000))

#endif


#endif
1	hedin	54	/*********************************************************************
2			*
3			* General Delay rouines
4			*
5			*********************************************************************
6			* FileName: delay.c
7			* Dependencies: compiler.h
8			* Processor: PIC18
9			* Complier: MCC18 v1.00.50 or higher
10			* HITECH PICC-18 V8.10PL1 or higher
11			* Company: Microchip Technology, Inc.
12			*
13			* Software License Agreement
14			*
15			* The software supplied herewith by Microchip Technology Incorporated
16			* (the “Company”) for its PICmicro® Microcontroller is intended and
17			* supplied to you, the Company’s customer, for use solely and
18			* exclusively on Microchip PICmicro Microcontroller products. The
19			* software is owned by the Company and/or its supplier, and is
20			* protected under applicable copyright laws. All rights are reserved.
21			* Any use in violation of the foregoing restrictions may subject the
22			* user to criminal sanctions under applicable laws, as well as to
23			* civil liability for the breach of the terms and conditions of this
24			* license.
25			*
26			* THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
27			* WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
28			* TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
29			* PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
30			* IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
31			* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
32			*
33			* HiTech PICC18 Compiler Options excluding device selection:
34			* -FAKELOCAL -G -Zg -E -C
35			*
36			* Note: HITECH portions is adopted from PICC18 sample "delay.c".
37			*
38			* Author Date Comment
39			*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
40			* Nilesh Rajbharti 5/9/02 Original (Rev 1.0)
41			* Nilesh Rajbharti 6/10/02 Fixed C18 ms and us routines
42			********************************************************************/
43			#ifndef DELAY_H
44			#define DELAY_H
45
46			#include "compiler.h"
47
48			#if defined(MCHP_C18)
49			#include <delays.h>
50			#endif
51
52			/*
53			* Delay functions for HI-TECH C on the PIC18
54			*
55			* Functions available:
56			* DelayUs(x) Delay specified number of microseconds
57			* DelayMs(x) Delay specified number of milliseconds
58			*
59			* Note that there are range limits:
60			* - on small values of x (i.e. x<10), the delay becomes less
61			* accurate. DelayUs is accurate with xtal frequencies in the
62			* range of 4-16MHZ, where x must not exceed 255.
63			* For xtal frequencies > 16MHz the valid range for DelayUs
64			* is even smaller - hence affecting DelayMs.
65			* To use DelayUs it is only necessary to include this file.
66			* To use DelayMs you must include delay.c in your project.
67			*
68			* Note that this is the crystal frequency, the CPU clock is
69			* divided by 4.
70			*
71			* MAKE SURE this code is compiled with full optimization!!!
72			*/
73			#define MHZ *1
74
75
76			#ifndef CLOCK_FREQ
77			#error CLOCK_FREQ must be defined.
78			#endif
79
80			#if CLOCK_FREQ < 8MHZ
81			#define uS_CNT 24 // 238 /* 4x to make 1 mSec */
82			#endif
83			#if CLOCK_FREQ == 8MHZ
84			#define uS_CNT 25 // 244
85			#else
86			#define uS_CNT 25 // 246
87			#endif
88
89			#define FREQ_MULT (CLOCK_FREQ)/(4MHZ)
90
91			#if defined(HITECH_C18)
92			#define Delay10us(x) \
93			{ \
94			unsigned char _dcnt; \
95			if(x>=4) \
96			_dcnt=(x*(FREQ_MULT))/4; \
97			else \
98			_dcnt=1; \
99			while(--_dcnt > 0) \
100			continue; \
101			}
102
103
104			void DelayMs(unsigned char ms);
105
106			#elif defined(MCHP_C18)
107			#define Delay10us(us) Delay10TCYx(((CLOCK_FREQ/4000000)*us))
108			#define DelayMs(ms) Delay1KTCYx((((CLOCK_FREQ/1000)*ms)/4000))
109
110			#endif
111
112
113
114			#endif