1 |
/*********************************************************************
|
2 |
*
|
3 |
* TFTP Client Demo App for Microchip TCP/IP Stack
|
4 |
*
|
5 |
*********************************************************************
|
6 |
* FileName: TFTPcDemo.c
|
7 |
* Dependencies: tftpc.h
|
8 |
* stacktsk.h
|
9 |
* xlcd.h
|
10 |
* tick.h
|
11 |
* Processor: PIC18
|
12 |
* Complier: MCC18 v1.00.50 or higher
|
13 |
* HITECH PICC-18 V8.10PL1 or higher
|
14 |
* Company: Microchip Technology, Inc.
|
15 |
*
|
16 |
* Software License Agreement
|
17 |
*
|
18 |
* The software supplied herewith by Microchip Technology Incorporated
|
19 |
* (the “Company”) for its PICmicro® Microcontroller is intended and
|
20 |
* supplied to you, the Company’s customer, for use solely and
|
21 |
* exclusively on Microchip PICmicro Microcontroller products. The
|
22 |
* software is owned by the Company and/or its supplier, and is
|
23 |
* protected under applicable copyright laws. All rights are reserved.
|
24 |
* Any use in violation of the foregoing restrictions may subject the
|
25 |
* user to criminal sanctions under applicable laws, as well as to
|
26 |
* civil liability for the breach of the terms and conditions of this
|
27 |
* license.
|
28 |
*
|
29 |
* THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
|
30 |
* WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
|
31 |
* TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
32 |
* PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
|
33 |
* IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
|
34 |
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
35 |
*
|
36 |
* Author Date Comment
|
37 |
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
38 |
* Nilesh Rajbharti 8/7/03 Original (Rev 1.0)
|
39 |
*
|
40 |
*
|
41 |
* This demo application demonstartes Microchip TFTP client module usage
|
42 |
* See TFTPDemo(), TFTPWrite() and TFTPRead() for actual implementation.
|
43 |
*
|
44 |
* This application monitors RB5 switch. On first push it
|
45 |
* writes 'tftpwr.bin' file to server. tftpwr.bin file is made up of
|
46 |
* first 16KB of program memory.
|
47 |
* On second push, it reads 'tftprd.txt' file from server.
|
48 |
*
|
49 |
* Server IP address is set in "Board Setup" mode using Hyperterminal.
|
50 |
*
|
51 |
* It displays rotating '-' to indicate command in progress.
|
52 |
* 'Y' to indicate success
|
53 |
* 'N' for failure
|
54 |
* 'T' for timeout
|
55 |
* 'E' for error.
|
56 |
*
|
57 |
*
|
58 |
* If running this applicaton on PICDEM.net use
|
59 |
* HS Oscillator
|
60 |
* Debug disabled
|
61 |
* Low Voltage Disabled
|
62 |
* Watchdog timer disabled
|
63 |
********************************************************************/
|
64 |
/*
|
65 |
* Following define uniquely deines this file as main
|
66 |
* entry/application In whole project, there should only be one such
|
67 |
* definition and application file must define AppConfig variable as
|
68 |
* described below.
|
69 |
*/
|
70 |
#define THIS_IS_STACK_APPLICATION
|
71 |
|
72 |
#include "stacktsk.h"
|
73 |
#include "dhcp.h"
|
74 |
#include "xlcd.h"
|
75 |
#include "tick.h"
|
76 |
#include "delay.h"
|
77 |
#include "udp.h"
|
78 |
#include "arp.h"
|
79 |
#include "arptsk.h"
|
80 |
|
81 |
|
82 |
// All TFTP command statuts display will be done on first line of LCD.
|
83 |
#define TFTP_COMMAND_DISPLAY_LINE 0
|
84 |
|
85 |
// Result will be displayed at y = 15.
|
86 |
#define TFTP_COMMAND_RESULT_POSITION 15
|
87 |
|
88 |
|
89 |
#define STARTUP_MSG "G1_Build_0x00"
|
90 |
|
91 |
ROM char StartupMsg[] = STARTUP_MSG;
|
92 |
|
93 |
#if defined(STACK_USE_DHCP) || defined(STACK_USE_IP_GLEANING)
|
94 |
ROM char DHCPMsg[] = "DHCP/Gleaning...";
|
95 |
#endif
|
96 |
|
97 |
ROM char SetupMsg[] = "Board Setup...";
|
98 |
|
99 |
// 1234567890123456
|
100 |
ROM char blankLCDLine[] = " ";
|
101 |
|
102 |
/*
|
103 |
* This is used by other stack elements.
|
104 |
* Main application must define this and initialize it with
|
105 |
* proper values.
|
106 |
*/
|
107 |
APP_CONFIG AppConfig;
|
108 |
|
109 |
|
110 |
BYTE myDHCPBindCount = 0;
|
111 |
#if defined(STACK_USE_DHCP)
|
112 |
extern BYTE DHCPBindCount;
|
113 |
#else
|
114 |
/*
|
115 |
* If DHCP is not enabled, force DHCP update.
|
116 |
*/
|
117 |
BYTE DHCPBindCount = 1;
|
118 |
#endif
|
119 |
|
120 |
/*
|
121 |
* Set configuration fuses for HITECH compiler.
|
122 |
* For MCC18 compiler, separately linked config.asm file
|
123 |
* will set the correct fuses.
|
124 |
*/
|
125 |
#if defined(HITECH_C18)
|
126 |
__CONFIG(1, UNPROTECT & HS);
|
127 |
__CONFIG(2, PWRTEN & BORDIS & WDTDIS);
|
128 |
#endif
|
129 |
|
130 |
|
131 |
/*
|
132 |
* Private helper functions.
|
133 |
* These may or may not be present in all applications.
|
134 |
*/
|
135 |
static void InitAppConfig(void);
|
136 |
static void InitializeBoard(void);
|
137 |
static void DisplayIPValue(IP_ADDR *IPVal, BOOL bToLCD);
|
138 |
static void SetConfig(void);
|
139 |
|
140 |
void main(void)
|
141 |
{
|
142 |
// Tick to blink SYSTEM led.
|
143 |
static TICK t = 0;
|
144 |
UDP_SOCKET usock1;
|
145 |
NODE_INFO rnode;
|
146 |
char sock_open = 0;
|
147 |
char is_resolved = 0;
|
148 |
|
149 |
|
150 |
/*
|
151 |
* Initialize any application specific hardware.
|
152 |
*/
|
153 |
InitializeBoard();
|
154 |
|
155 |
/*
|
156 |
* Initialize all stack related components.
|
157 |
* Following steps must be performed for all applications using
|
158 |
* PICmicro TCP/IP Stack.
|
159 |
*/
|
160 |
TickInit();
|
161 |
|
162 |
/*
|
163 |
* Initialize Stack and application related NV variables.
|
164 |
*/
|
165 |
InitAppConfig();
|
166 |
|
167 |
StackInit();
|
168 |
|
169 |
#if defined(STACK_USE_DHCP) || defined(STACK_USE_IP_GLEANING)
|
170 |
if ( AppConfig.Flags.bIsDHCPEnabled )
|
171 |
{
|
172 |
XLCDGoto(1, 0);
|
173 |
XLCDPutROMString(DHCPMsg);
|
174 |
}
|
175 |
else
|
176 |
{
|
177 |
/*
|
178 |
* Force IP address display update.
|
179 |
*/
|
180 |
myDHCPBindCount = 1;
|
181 |
#if defined(STACK_USE_DHCP)
|
182 |
DHCPDisable();
|
183 |
#endif
|
184 |
}
|
185 |
#endif
|
186 |
|
187 |
|
188 |
/*
|
189 |
* Once all items are initialized, go into infinite loop and let
|
190 |
* stack items execute their tasks.
|
191 |
* If application needs to perform its own task, it should be
|
192 |
* done at the end of while loop.
|
193 |
* Note that this is a "co-operative mult-tasking" mechanism
|
194 |
* where every task performs its tasks (whether all in one shot
|
195 |
* or part of it) and returns so that other tasks can do their
|
196 |
* job.
|
197 |
* If a task needs very long time to do its job, it must broken
|
198 |
* down into smaller pieces so that other tasks can have CPU time.
|
199 |
*/
|
200 |
|
201 |
|
202 |
// Defines the IP add. on the server machine
|
203 |
rnode.IPAddr.v[0] = 192;
|
204 |
rnode.IPAddr.v[1] = 168;
|
205 |
rnode.IPAddr.v[2] = 1;
|
206 |
rnode.IPAddr.v[3] = 20;
|
207 |
/*rnode.MACAddr.v[0] = 0x00;
|
208 |
rnode.MACAddr.v[1] = 0x16;
|
209 |
rnode.MACAddr.v[2] = 0x76;
|
210 |
rnode.MACAddr.v[3] = 0x9F;
|
211 |
rnode.MACAddr.v[4] = 0xFE;
|
212 |
rnode.MACAddr.v[5] = 0xDA;*/
|
213 |
|
214 |
|
215 |
|
216 |
|
217 |
while(1)
|
218 |
{
|
219 |
/*
|
220 |
* Blink SYSTEM LED every second.
|
221 |
*/
|
222 |
if ( TickGetDiff(TickGet(), t) >= TICK_SECOND/2 )
|
223 |
{
|
224 |
t = TickGet();
|
225 |
LATA4 ^= 1;
|
226 |
}
|
227 |
|
228 |
/*
|
229 |
* This task performs normal stack task including checking
|
230 |
* for incoming packet, type of packet and calling
|
231 |
* appropriate stack entity to process it.
|
232 |
*/
|
233 |
StackTask();
|
234 |
|
235 |
/*
|
236 |
* For DHCP information, display how many times we have renewed the IP
|
237 |
* configuration since last reset.
|
238 |
*/
|
239 |
|
240 |
if ( DHCPBindCount != myDHCPBindCount )
|
241 |
{
|
242 |
DisplayIPValue(&AppConfig.MyIPAddr, TRUE);
|
243 |
myDHCPBindCount = DHCPBindCount;
|
244 |
|
245 |
if ( AppConfig.Flags.bIsDHCPEnabled )
|
246 |
{
|
247 |
XLCDGoto(1, 14);
|
248 |
if ( myDHCPBindCount < 0x0a )
|
249 |
XLCDPut(myDHCPBindCount + '0');
|
250 |
else
|
251 |
XLCDPut(myDHCPBindCount + 'A');
|
252 |
}
|
253 |
}
|
254 |
|
255 |
if (DHCPIsBound())
|
256 |
{
|
257 |
RA3 =0;
|
258 |
if (sock_open == 0)
|
259 |
{
|
260 |
if (ARPIsTxReady())
|
261 |
{
|
262 |
if (is_resolved == 0)
|
263 |
{
|
264 |
ARPResolve( &rnode.IPAddr);
|
265 |
is_resolved = 1;
|
266 |
}
|
267 |
else
|
268 |
{
|
269 |
if (ARPIsResolved( &rnode.IPAddr, &rnode.MACAddr))
|
270 |
{
|
271 |
usock1=UDPOpen(2000,&rnode,3000); // socket to send UDP
|
272 |
sock_open=1;
|
273 |
}
|
274 |
}
|
275 |
|
276 |
|
277 |
|
278 |
}
|
279 |
}
|
280 |
|
281 |
if (UDPIsPutReady(usock1))
|
282 |
{
|
283 |
UDPPut( rnode.MACAddr.v[0] );
|
284 |
UDPPut( rnode.MACAddr.v[1] );
|
285 |
UDPPut( rnode.MACAddr.v[2] );
|
286 |
UDPPut( rnode.MACAddr.v[3] );
|
287 |
UDPPut( rnode.MACAddr.v[4] );
|
288 |
UDPPut( rnode.MACAddr.v[5] );
|
289 |
UDPPut('D');
|
290 |
UDPPut('a');
|
291 |
UDPPut('w');
|
292 |
UDPPut(0);
|
293 |
UDPFlush();
|
294 |
}
|
295 |
}
|
296 |
}
|
297 |
}
|
298 |
|
299 |
#if defined(MCHP_C18)
|
300 |
#pragma interrupt HighISR save=section(".tmpdata")
|
301 |
void HighISR(void)
|
302 |
#elif defined(HITECH_C18)
|
303 |
#if defined(STACK_USE_SLIP)
|
304 |
extern void MACISR(void);
|
305 |
#endif
|
306 |
void interrupt HighISR(void)
|
307 |
#endif
|
308 |
{
|
309 |
TickUpdate();
|
310 |
/*
|
311 |
#if defined(STACK_USE_SLIP)
|
312 |
MACISR();
|
313 |
#endif
|
314 |
*/
|
315 |
}
|
316 |
|
317 |
#if defined(MCHP_C18)
|
318 |
#pragma code highVector=0x08
|
319 |
void HighVector (void)
|
320 |
{
|
321 |
_asm goto HighISR _endasm
|
322 |
}
|
323 |
#pragma code /* return to default code section */
|
324 |
#endif
|
325 |
|
326 |
static void DisplayIPValue(IP_ADDR *IPVal, BOOL bToLCD)
|
327 |
{
|
328 |
char IPDigit[8];
|
329 |
|
330 |
if ( bToLCD )
|
331 |
{
|
332 |
/*
|
333 |
* Erase second line.
|
334 |
*/
|
335 |
XLCDGoto(1, 0);
|
336 |
XLCDPutROMString(blankLCDLine);
|
337 |
|
338 |
}
|
339 |
|
340 |
/*
|
341 |
* Rewrite the second line.
|
342 |
*/
|
343 |
XLCDGoto(1, 0);
|
344 |
|
345 |
itoa(IPVal->v[0], IPDigit);
|
346 |
if ( bToLCD )
|
347 |
{
|
348 |
XLCDPutString(IPDigit);
|
349 |
XLCDPut('.');
|
350 |
}
|
351 |
|
352 |
itoa(IPVal->v[1], IPDigit);
|
353 |
if ( bToLCD )
|
354 |
{
|
355 |
XLCDPutString(IPDigit);
|
356 |
XLCDPut('.');
|
357 |
}
|
358 |
|
359 |
itoa(IPVal->v[2], IPDigit);
|
360 |
if ( bToLCD )
|
361 |
{
|
362 |
XLCDPutString(IPDigit);
|
363 |
XLCDPut('.');
|
364 |
}
|
365 |
|
366 |
itoa(IPVal->v[3], IPDigit);
|
367 |
if ( bToLCD )
|
368 |
XLCDPutString(IPDigit);
|
369 |
}
|
370 |
|
371 |
/*********************************************************************
|
372 |
* Function: void InitializeBoard(void)
|
373 |
*
|
374 |
* PreCondition: None
|
375 |
*
|
376 |
* Input: None
|
377 |
*
|
378 |
* Output: None
|
379 |
*
|
380 |
* Side Effects: None
|
381 |
*
|
382 |
* Overview: Initialize board specific hardware.
|
383 |
*
|
384 |
* Note: None
|
385 |
********************************************************************/
|
386 |
static void InitializeBoard(void)
|
387 |
{
|
388 |
/*
|
389 |
* Setup for PORTA.RA0 as analog input while rests
|
390 |
* as digital i/o lines.
|
391 |
*/
|
392 |
ADCON1 = 0b10001110; // RA0 as analog input, Right justified
|
393 |
TRISA = 0x03;
|
394 |
|
395 |
/*
|
396 |
* LCD is enabled using RA5.
|
397 |
*/
|
398 |
PORTA_RA5 = 0; // Disable LCD.
|
399 |
|
400 |
/*
|
401 |
* Turn off the LED's.
|
402 |
*/
|
403 |
LATA2 = 1;
|
404 |
LATA3 = 1;
|
405 |
|
406 |
/*
|
407 |
* External data EEPROM needs pull-ups, so enable internal
|
408 |
* pull-ups.
|
409 |
*/
|
410 |
INTCON2_RBPU = 0;
|
411 |
|
412 |
XLCDInit();
|
413 |
XLCDGoto(0, 0);
|
414 |
XLCDPutROMString(StartupMsg);
|
415 |
|
416 |
T0CON = 0;
|
417 |
INTCON_GIEH = 1;
|
418 |
INTCON_GIEL = 1;
|
419 |
|
420 |
}
|
421 |
|
422 |
/*********************************************************************
|
423 |
* Function: void InitAppConfig(void)
|
424 |
*
|
425 |
* PreCondition: MPFSInit() is already called.
|
426 |
*
|
427 |
* Input: None
|
428 |
*
|
429 |
* Output: Write/Read non-volatile config variables.
|
430 |
*
|
431 |
* Side Effects: None
|
432 |
*
|
433 |
* Overview: None
|
434 |
*
|
435 |
* Note: None
|
436 |
********************************************************************/
|
437 |
static void InitAppConfig(void)
|
438 |
{
|
439 |
/*
|
440 |
* Load default configuration into RAM.
|
441 |
*/
|
442 |
AppConfig.MyIPAddr.v[0] = MY_DEFAULT_IP_ADDR_BYTE1;
|
443 |
AppConfig.MyIPAddr.v[1] = MY_DEFAULT_IP_ADDR_BYTE2;
|
444 |
AppConfig.MyIPAddr.v[2] = MY_DEFAULT_IP_ADDR_BYTE3;
|
445 |
AppConfig.MyIPAddr.v[3] = MY_DEFAULT_IP_ADDR_BYTE4;
|
446 |
|
447 |
AppConfig.MyMask.v[0] = MY_DEFAULT_MASK_BYTE1;
|
448 |
AppConfig.MyMask.v[1] = MY_DEFAULT_MASK_BYTE2;
|
449 |
AppConfig.MyMask.v[2] = MY_DEFAULT_MASK_BYTE3;
|
450 |
AppConfig.MyMask.v[3] = MY_DEFAULT_MASK_BYTE4;
|
451 |
|
452 |
AppConfig.MyGateway.v[0] = MY_DEFAULT_GATE_BYTE1;
|
453 |
AppConfig.MyGateway.v[1] = MY_DEFAULT_GATE_BYTE2;
|
454 |
AppConfig.MyGateway.v[2] = MY_DEFAULT_GATE_BYTE3;
|
455 |
AppConfig.MyGateway.v[3] = MY_DEFAULT_GATE_BYTE4;
|
456 |
|
457 |
AppConfig.MyMACAddr.v[0] = MY_DEFAULT_MAC_BYTE1;
|
458 |
AppConfig.MyMACAddr.v[1] = MY_DEFAULT_MAC_BYTE2;
|
459 |
AppConfig.MyMACAddr.v[2] = MY_DEFAULT_MAC_BYTE3;
|
460 |
AppConfig.MyMACAddr.v[3] = MY_DEFAULT_MAC_BYTE4;
|
461 |
AppConfig.MyMACAddr.v[4] = MY_DEFAULT_MAC_BYTE5;
|
462 |
AppConfig.MyMACAddr.v[5] = MY_DEFAULT_MAC_BYTE6;
|
463 |
|
464 |
#if defined(STACK_USE_DHCP)
|
465 |
AppConfig.Flags.bIsDHCPEnabled = TRUE;
|
466 |
#else
|
467 |
AppConfig.Flags.bIsDHCPEnabled = FALSE;
|
468 |
#endif
|
469 |
}
|
470 |
|
471 |
BOOL StringToIPAddress(char *str, IP_ADDR *buffer)
|
472 |
{
|
473 |
BYTE v;
|
474 |
char *temp;
|
475 |
BYTE byteIndex;
|
476 |
|
477 |
temp = str;
|
478 |
byteIndex = 0;
|
479 |
|
480 |
while( v = *str )
|
481 |
{
|
482 |
if ( v == '.' )
|
483 |
{
|
484 |
*str++ = '\0';
|
485 |
buffer->v[byteIndex++] = atoi(temp);
|
486 |
temp = str;
|
487 |
}
|
488 |
else if ( v < '0' || v > '9' )
|
489 |
return FALSE;
|
490 |
|
491 |
str++;
|
492 |
}
|
493 |
|
494 |
buffer->v[byteIndex] = atoi(temp);
|
495 |
|
496 |
return (byteIndex == 3);
|
497 |
}
|
498 |
|
499 |
|
500 |
void XLCDDelay15ms(void)
|
501 |
{
|
502 |
DelayMs(15);
|
503 |
}
|
504 |
void XLCDDelay4ms(void)
|
505 |
{
|
506 |
DelayMs(4);
|
507 |
}
|
508 |
|
509 |
void XLCDDelay100us(void)
|
510 |
{
|
511 |
INTCON_GIEH = 0;
|
512 |
Delay10us(1);
|
513 |
INTCON_GIEH = 1;
|
514 |
}
|